Round the Year Quilt Block 16 may take some more time to be posted, as my daughter was hospitalized and we have returned home just today! I am more than half way through the block, but I do not know when I shall be able to work on it…
Meanwhile, there is also some good news on my front ! I had made a wall quilt for the Husqvarna Viking India- Pfaff quilt challenge 2015 and… I won the first prize!
Here is a peek into my quilt when it was under construction, I will share with you all the pictures in a separate blogpost! You could, of course, visit my Patchwork of My Life page on facebook and see the pictures there.
Again, I am really sorry for the delay, but I hope you will understand!
The Winding Ways Wheel , Block 15 of the Round the Year Quilt
Can you believe this is the last but one block the DreamcatcherRound the Year Block of the Month Quilt? I was in two minds whether to include this beautiful traditional pieced block in this quilt, where all the other blocks are majorly paper pieced. You decided it for me and I couldn’t be happier!
I first made up this block almost 4 years ago, when I was quite new to quilting, using the winding ways block. I drafted it using this great tutorial by Kathy Somers. Partly pieced by hand and partly by machine, it finished at 4.5″ including the seams! I plan to include it in the next major project I embark on, a quilt made with miniature 4″ blocks including, perhaps, a few Dear Jane and Nearly Insane quilt blocks and some of my very own.
To get back to Block Fifteen, it finishes at 18.5″ square with the seam allowances. The inset circle is 15″ plus 1/2″ seam allowance. I have drafted this on free quilt design software Quilt Assistant, which I have used to draft all the blocks of this quilt!
The block looks difficult, but the curves are really gentle and if you cut accurately, and pin carefully, it is a breeze to piece!
Fabric Requirement
Winding Ways Wheel – Fabric Code and Colour Pattern
This block will be appliquéd to the background square. You will need a 19″ square in Fabric#1 .
Printing Instructions
1. Print the Instructions File and Templates File on A4 size paper with your printer settings on 100% or Actual Size in portrait mode. I used freezer paper to print the templates. I just press it on the fabric and cut around it!
To print on freezer paper, cut A4 size freezer paper and lightly iron the edges on to regular printer paper. Print as usual on freezer paper side . Use a paper knife to separate.
Prepare the freezer paper for printing by pressing the edges lightly on regular printing paper.
2. Cut the templates A, B and C . I cut 2 sets of the templates to make the fabric cutting faster. You could also print them on ordinary paper, paste on stiff card and cut out to make reusable templates.
Cutting and Piecing Instructions
Please starch your fabric before cutting, to ensure accuracy and crispness in your block.
As you cut the fabric, use the alignment markers on the templates to mark the centre of each side of the fabric pieces. I have made notches as markers. I also marked the corners with a pencil on each of the pieces. I learnt the hard way that you save a lot of heartburn by taking time at this stage.
Follow the colour diagram and arrange all the fabric pieces where you do not need to disturb them.
The block will be pieced in different sections, numbered 1 to 7 here, as shown here and then assembled. Please follow pressing instructions, they are very important in this block! Trust me, I have made a whole quilt with these blocks.
Piecing and assembly diagram
Referring to the colour pattern, align the curved side of B on top of concave side of A, for all sets of A and B. Pin at the centre notch. I pinned them with the pin on the fabric and had to repin with the pin sticking out before sewing!
Do not pin like this! The pin should face the other way, stick out!
When piecing, you need only two pins. Match the blunt ends of the two pieces one at the corner where you begin, pin. The other pin is at the centre notch.
You need only two pins…
Once you are past the centre notch, use a pair of small forceps/ tweezers to gently align the fabric and finish the curve.
Use a pair of tweezers to ease fabric and match corners neatly
Piece all A-B sets. Press seam towards B.
Press seams towards B
Add piece C to one set of A-B in each of the sections # 1, 2, 4, 5, 6 and 7. Place C on top, match notches, pin. The other pin aligns the corner points at the narrow end, where we begin the seam.
Two pins – one at narrow end and other at centre notch.
Press seam towards A.
Do not skip on the pressing after each stage, if you want a pretty block.
Sew other set of AB from the section to corresponding ABC just sewn. Again, begin with narrow end of C on top. You will have to change your machine needle settings; in my machine, ¼” seam is at needle setting 1.8, so I shift it to -1.8 when doing this step. The seam will be on the left and fabric on the right as you face the machine!
I adjusted my needle position, so that the 1/4″ seam is on the left and the fabric on the right! On my Husqvarna VIking Topaz 20, this position is -1.8
Again, press the seam towards A.
Getting there! Note the seams…
Section#3 has just two C pieces. Reduce seam length, fix the seam at both ends. Join them at the narrow end and finger press open the seam.
Use a smaller stitch length, fix the thread ends. Finger press open.
Join the corner B pieces to Sections#6 and #7 and press seam open.
Sections #6 and # 7 – press the seam open after joining corner pieces
All our sections are pieced!
Assembly Instructions
First we assemble the centre square. (This is the basic winding ways block!) This is the crucial step which will determine the beauty of the block.
Carefully pin Section 3 centre seam to centre of Section 1.
Do not be in a hurry here!
Next, match the notch on the long side of C to notch on A and pin. Start sewing from centre outwards on one side, then the other. This way you can check if your centre points are matched or not!
Press seams toward A, away from the narrow section 3.
Similarly pin Section#2 to just assembled Section#1-3 and sew. Again press seam away from Section#3.
Not perfect . I ripped a few cms and re-did it!
Ready for final assembly…
Now we sew Section#4 and #5 to centre square 123. Match notches and corresponding seams and pin.
The seams are REALLY bulky and you may need to use a lot of maneuvering to get them right!
Those seams are nasty!
Sew. Press seams open.
I like that!
We are on the last step already! AS usual, match all intersecting seams and notches and join sections#6 and #7 to 12345. Press seams open.
Neat?
I am quite happy with my block!
All that remains is to appliqué it to the 19″ background square and trim it to 18.5″. I am planning to use the freezer paper method to do so. What is your favourite method to appliqué a circle to a square?
I would love to see the blocks you come up with – on my Facebook page.
The pretty, pretty Winding Ways Wheel Block!
The sixteenth and last block will be up on May 1st! Like I told you, my mind is already on a fast forward mode, planning what is coming up next – perhaps, to a quilt with miniature blocks?! I do hope I will have the patience to finish this Round the Year quilt before that!
Please note that the downloadable patterns with paper piecing templates and instruction files for the Dreamcatcher Round the Year quilt blocks are being migrated to my store MadsPatch and will not be available for download for free from 15th November 2020 onwards.
We have two more blocks left in the Round the Year Quilt and you get to choose which ones they should be! So let me know which two blocks you would like. To vote, you can either leave a comment here, or vote on the facebook page “Patchwork of My Life”.
You do remember that Block 15 will be released only around 15th April, don’t you? Happy choosing!
Round the Year Quilt
I decided to add a poll to this post, to make it easier for you to vote! Please select two options.
I started designing Block Fourteen as a tribute to the Dear Jane quilt. I experimented with a number of the Dear Jane triangular blocks, placing them revolving around a centre point to make a circle. This design came about when I was playing (on the free Quilt Assistant software ) with the block where flying geese fly outwards. I immediately fell in love with it! It does have a hypnotic quality to it, like a Mandala you can meditate upon. Also, if you take each of those wedges and subtract the outer level, the design remains the same. So, I have been trying ( in vain) to convince the few mathematicians whom I know, that this pattern a fractal! As a concession to them, I call this the (Almost) Fractal Mandala.
And so, I present to you, Block 14 of the Round the Year Block of the Month Quilt, the (Almost) Fractal Mandala!
Much to my chagrin, I discovered after I had made the block, that a similar block ( I do not know the name) already exists! I am still very proud of it, because I discovered my Mount Everest on my own, and climbed it too! So there!
Block 14 ( Almost) Fractal Mandala, Round the Year Quilt
The block, like all other blocks of the BOM quilt, is designed as a 15″ circle inset in an 18.5″ ( unfinished) square. It is a deceptively easy block to piece, hence not too many photos accompany this post.
The templates and instructions can be downloaded from the links at the end of this post. You can find the links to patterns for all the other blocks of this quilt on the Dreamcatcher Round the Year Quilt Page ( click on the link above).
The brilliant Tina Katwal, one of the pioneer quilters from India, took out time from her busy schedule to test this block and you have to thank her, that you do not struggle with stingy fabric requirements!
Fabric Requirement
The Dusk colourway uses 4 shades of blue and 4 fabrics in a contrasting yellow to orange range. I suggest you use use solids or very small prints combined with solids to best highlight the design element of the block. I have used Fossil Fern by Benartex for mine.
Fabric Code Block 14 Almost Fractal Mandala
This is a great block for using any scraps/ strips of various sizes and shapes left over from the previous blocks. Nevertheless, I have tried to give some kind of estimate of the fabric requirement.
Please spray starch and press all your fabric before cutting!
Fabric Colour
Code
Fabric needed
Orange
4
2.5″ x 32″
Gold
5
4″ x 19″
Light Orange
6
3.5″ x 14″
Yellow
7
3.5″ x18″
Light Blue
1
4.5″ square 20″ x 12.5″ strip
Medium Blue
2
3″ WOF strip +
strips 8″ -10″of various widths 1.75 to 2.5″
Deepest Blue
3
3″ WOF strip strips 8-10″ of various widths 1.75 to 2.5″
Medium-Deep Blue
8
4.5″ square
Cutting Instructions
I suggest you label your fabric so that you do not get confused as you cut so many strips. An easy way to do this is sticking a piece of freezer paper with the code on it on the strip!
For ease in piecing, you can cut and sort your fabric template wise as follows:
Fabric Code
ABCD
EFGH
IJKL
MNOP
QRST
UVWX
4 Orange
For diamonds 2 strips 2.5″ x 16″
5 Gold
4 HSTs 3.5″
For diamonds 2 strips 2″ x 12″
6 Light Orange
4 HSTs 3.5″
4 HSTs 3.5″
7 Yellow
4 HSTs 3.5″
2 strips 1.75″ x 11″ for diamonds
1 Light blue
4QSTs from 4.5″ square
20″ x 12.5″
2 Medium blue
3″ x 19″
4HSTs 3″
4HSTs 3″ 4HSTs 2.5″
4HSTs 2.0″ 4HSTs 1.75″
4QSTs 3″
3 Deepest blue
3″ x 19″
4 HSTs 3″
4HSTs 3″ 4HSTs 2.5″
4HSTs 2.0″ 4HSTs 1.75″
4QSTs 3″
8 Medium to deep blue
4QSTs from 4.5″ square
While I pieced with strips, I thought it would have made life much simpler had I cut the diamonds earlier. Note that the two sets of diamonds on each template face opposite directions, hence the 2 strips in the cutting instructions for the diamonds. Here is my fabric for the block, all cut and sorted.
Fabric cut and sorted out
Templates
1. Print the templates with your printer settings at 100% (or actual size).
2. Templates A to H are given in two parts each, with instructions to glue them. You could also piece these separately and then join at the centre seams. I have done that for the first two sets of templates, ABCD and EFGH.
3. Glue together the two parts of background Template U on the edge indicated. Use this to cut 4 identical pieces for U, V, W and X and put aside.
Piecing Instructions
I suggest piecing alphabetically,that is first on the larger templates at circle edge. You can use scraps from the larger pieces on the smaller templates inside! Piece in the following order:
– A, B, C and D
– E, F, G and H
– I, J, K and L
– M, N, O and P
– Q, R, S and T
Templates A, B, C and D had been printed on freezer paper, without gluing on the centre line as indicated In the templates. Cutting the wedges became as simple as this…
You could also use ordinary paper printed templates…
All I had to do was to add the triangles on the wedges. (If you have glued your templates A,B, C and D between pieces #3 and #4, plese do not get confused by these photos!)
You can glue the two halves of the templates togeteher and piece them in one go!
E, F, G and H were (each) also pieced in halves without gluing in the centre, and sewn together on the centre later, just before assembly.
E, F, G and H pieced in halves…you can glue the templates at centre between piece# 3 and #4 and piece these as single units!
For the rest of the templates, I pieced with strips, like I said, placing the strips perpendicular to each other as I went along.
Place the strip for the diiamond at right angles to the previous strip and sew on seam lineCovering the diamond…
A triangular piece comes in next, note, in the upcoming photo, that the blue strip was placed straight along the template for this seam between piece #3 and #4. This is followed by another diamond strip at right angles to the template. Use the other diamond strip for this!
Note the blue strip for piece#4 is placed straight along template. The diamond yellow is again at right angles
After that diamond, there is only one more blue triangle to add and we are done!
Similarly, piece all the templates, I to P. Once you get the hang of it, it comes up really fast!
I did not take too many pics, but here are a couple of photos of the centre templates Q, R, S and T being pieced!
Templates Q, R, S and T ready for chain piecing……and done, except for the corners! Fast work!
The scraps from the previous templates come in useful for the corners of the centre templates!
Assembly Instructions
Use the Master Template (mirror image) as a guide to assembly. The Instructions file also contains a coloured mirror image guide.
I removed the paper before assembly.
The Master Template is a mirror image! Left is right and right is left!
Assemble the block in quadrants. But before you begin, lay them all together to see if all is in order, and of course, to admire!
I love this! Piecing finished in one evening!
( First, I sewed the respective template halves A to H. If you glued your templates before piecing you will not need to do this. )
I am ready for assembly now! I joined the outermost two templates A to E; B to F; C to G and D to H, and put them aside. (as I did not want to risk the wedges on the A, B, C and D templates getting misshapen.)
The rest of the templates, I joined from centre outwards. ( All templates at each ‘level’ are similar so it really does not matter whether you pick up M or N to join to Q, R, S or T!)
Here is the finished circle, from the back. Note that seams on adjoining quadrants are pressed in opposite directions, so that they interlock.
As far as possible, press adjoining seams in opposite directions to interlock them when sewing … ensures sharper corners!
5. Done ! Now join the background. You can join the individual quadrants to the background pieces U, V, W and X and then join the 4 squares together to form the 18.5″ square.
I am not joining any of the circles to the background till all of them are done.
We begin putting the quilt top together in May, after the final sixteenth block comes up on 1st May.
Block 15 will be posted only on 16th April 2015 as I am travelling and am otherwise busy, so you have plenty of time to catch up, if you began late or are straggling behind on the blocks.
Meanwhile, do put in a comment if you like this block and are doing this quilt… and make my day! Please write in if you have a problem with the instructions, or if you discover a better way of piecing my blocks.
I would also love to see your blocks posted on my Facebook page Patchwork of My Life.
Okay, so we are all done here, except for one important thing, the block pattern and instructions! You need Adobe Acrobat on your computer ( available for free download) to be able to view these files.
1.Block 14 Fractal Mandala Instructions
2.Block 14 Fractal Mandala Templates
Please note that the downloadable patterns with paper piecing templates and instruction files for the Dreamcatcher Round the Year quilt blocks are being migrated to my store MadsPatch and will not be available for download for free from 15th November 2020 onwards.
You must be logged in to post a comment.